audiofil rendszerek kezdőknek és haladóknak

Kérdése van? Hívjon minket! +36-1/321-5384

Epos K1
Epos K1
168 000 Ft

Epos K1

The K-Series sees the start of a new era in Epos’s history. The first speaker range to be designed by Luke Creek sees the introduction of
slot-port technology, the reintroduction of simplistic crossover design and a very clever removable rear panel allowing digital upgrades.

The K1 is the starting point in this new range. This small stand-mount speaker delivers a rich deep and involving soundstage with bass quality
that will have you hunting for a hidden subwoofer. Designed to be used with an eclectic spectrum of music, the K1 is soon to be the benchmark
that all others will be judge by.

The K series features an unusual front firing slot port, rear mounted drivers and painted cabinet finishes. The K-Series is not only sleek
and stylish, it also has a clever trick hidden up its sleeve.

Out of the box the K-Series is a stylish and sonically impressive passive loudspeaker, built to a very high standard. Now for the trick;
designed into the K-Series is a latent upgrade path that allows it to be converted from a passive to a sophisticated ‘active digital’ product,
using an optional Active-K module. Active-K allows the K1 to be at the heart of a 21st century ‘Hi-Resolution’ audio system.

The K-Series is much more than just another box loudspeaker, it paves the way to the future of Hi-Fi!

 

 

Tweeter
Using virtual performance CAD simulation tools, Epos has achieved very high performance, and a clean, open yet smooth sound quality from this tweeter.

The tweeter has a low resonance frequency, high sensitivity and extended high frequency response. With a 25mm fabric-dome, short horn, high-temperature ferro-fluid cooled voice-coil, and neodymium magnet, it is capable of high output levels for extended periods without degradation to sound quality.

Mid-Bass Driver
The Epos K1 mid-bass drivers produces an even frequency response and smooth roll-off.
The Epos 150mm mid-bass driver has a high-quality polypropylene cone and a bullet-shaped dust cap. These components form a stiff, yet pliable, well-damped structure which retains its shape even under high power loading.
The K1 mid-bass drivers also benefits from a bucking-magnet system, ensuring all the magnetic force is concentrated around the voice-coil, allowing for low distortion and high efficiency.

Crossover
In true Epos tradition; the K-series has reverted to a more simplistic passive crossover topology, for which the brand is synonymous.
A first order crossover is used to allow the Epos tweeter to have a wide dynamic range with super low distortion. The mid-bass crossover uses a 2nd order filter ensuring the K1 is an easy load for any amplifier.

168 000 Ft
Részletek

Power Handling
100 Watts unclipped speech and music
Frequency Range
51 Hz – 30 kHz ±3dB
Impedance
4 Ohm nominal
Sensitivity
88dB / 2.83V@1m
Tweeter
Epos 25mm soft dome with high-temperature voice coil, ferrofluid cooling and neodymium magnet system.
Bass/Midrange Driver
x1 150mm Epos mid bass drivers, with 25mm high-temperature voice coil and polypropylene cone.
Internal wiring
18 AWG stranded oxygen free copper cable.
Finish
Painted White or Black (Real Wood finish coming soon)
Grille
The K1 has an optional Snap on-grille.
Size
185 x 226 x 295 mm (W x D x H)
Weight
5.5 kg per single speaker
12 kg per packed pair